We have moved full time to the Ranch property and, as a result, have consolidated two ham shacks into one. The following items are For Sale:
Ameritron ALS-600s (switching power supply included)
NEW $1975 – For Sale $1200
–Includes Ameritrons no tune FET Amplifier and a 120/220 VAC, 50/60 Hz AC power supply for home operation.
–Instant bandswitching, no tuning, no warm up
–Output Power – 600 Watts PEP, 500 Watts CW
–Continuous Coverage – 1.5 to 22 MHz Plus 10/12 Meters
–SWR Protection – prevents amplifier damage if you switch to wrong band, use wrong antenna or have high SWR
–Over Power Protection – if output forward power or reflected power exceeds safe level, output power is automatically reduced to prevent amplifier damage by controlling ALC to exciter.
–Extremely quiet – low speed, low volume fan is so quiet you’ll hardly know its there, unlike noisy blowers used in other amps.
–Very Compact – 6 x 9 1/2 x 12 inch amplifier takes up less desktop space than your transceiver and weighs 12 1/2 pounds.
–Illuminated Cross-Needle SWR/Wattmeter – lets you read SWR, forward and reflected peak power simultaneously
–Operate/Standby Switch – lets you run “barefoot”, but you can instantly switch to full power if you need it.
–Front Panel ALC Control – exclusive Ameritron feature – convenient front panel control lets you adjust your output power.
–Transmit, ALC SWR LED indicators – keeps you informed.
–12 VDC output jack – lets you power low current accessories.
–Separate ALS-600PS power supply (included) can be placed conveniently out of the way and plugged into your nearest 120 VAC outlet – no special wiring needed. Made in USA.
–enjoy 600 Watts of no tune solid state power. Call your favorite dealer for your best price, order ALS-600 with power supply.
–Massive choke input filter greatly improves voltage regulations nd reduces peak AC line current.
–Ameritrons exclusive Multi-Voltage Power Transformer lets you compensate for stressful high line voltage and performance robbing low line voltage.
–Step Start Inrush Protection stops damaging inrush currents and extends life of power supply components.
–Illuminated Cross-Needle Meter monitors voltage and current of 50 VDC line.
–Extremely quiet fan.
–Very Compact 6″ x 9 ” x 12″ – can be placed conveniently out-of-way.
–Wired for 120 VAC, supplies 50 VDC at 25 amps to ALS-600 amplifier.
–Also use on 100-130 VAC and 220-250 VAC, 50/60 Hz.
–Draws less than 12 amps at 100 VAC and less than 6 amps at 230 VAC.
Icom IC-V8000 VHF Mobile NEW $250 – For Sale $125
75W of output power
The combination of Icom’s one piece, die-cast aluminum chassis and 75W of transmit power gives you the most powerful 2m mobile transceiver in its class! Your communications will get through.
HM-133V, remote control microphone
The backlit HM-133V*, gives you control of your IC-V8000 in the palm of your hand. The Icom exclusive “Hot keys” (F1/F2) memorize the transceiver full settings. As if switching between two separate radios, all operating frequencies, tone settings as well as the display color, fan speed, and set mode settings are memorized.
* Optional for some versions.
Dynamic Memory Scan (DMS)
With 200 alphanumeric memory channels, Icom’s exclusive DMS system gives you flexibility over your scanning lists never offered before in a 2m mobile, fully customizable into 10 banks.
CTCSS and DTCS operation standard
50 CTCSS and 104×2 DTCS encode/decode plus tone scan functions for various communication applications. The “pocket beep” feature gives you an audible and visual indicator of an incoming call.
Weather Alert Scan (U.S.A. version only)
An amateur radio first, the IC-V8000 features a weather alert function to keep you on top of any weather emergencies. With a weather radio mode or weather alert, you are ready for quick response.
The perfect solution for mobile operation, the ICV8000 has a front firing speaker providing crisp and clear audio. Along with a 6 character alphanumeric display, it offers quick reference of user-defined memory channel information.
Standard DTMF encoder and optional decoder
10 DTMF memory channels with up to 24-digit DTMF codes can be used to control other equipment. The optional UT-108 DTMF decoder provides code squelch and pager functions.
MFJ-434B Voice Keyer NEW $199 – For Sale $75
Let this microprocessor controlled MFJ Contest Voice Keyer call CQ, send your call and do contest exchanges for you in your own natural voice!
Store frequently used phrases like “CQ Contest this is AA5MT”, “You’re 59” . . .
“QTH is Mississippi” and more! Contest by pressing a few buttons and save your voice.
You can record and play back five natural sounding messages in a total of 75 seconds. EEPROM technology keeps messages stored for up to 100 years — no battery backup needed.
You can repeat messages continuously and vary the repeat delay from 3 to 500 seconds. Makes a great voice beacon and calling CQ is so easy. A receive audio jack lets you record and play back off-the-air signals — great help if you didn’t get it right the first time! No more “Please repeat”.
A playing message can be halted by pressing the Stop Button, your PTT mic button or by your VOX PTT line. A closure to ground via remote control or computer also halts messages.
Has jack for remote or computer control (using CT, NA, TR or other program and its interface). Lets you select, play and cancel messages.
The MFJ-434B is transparent to your microphone — your mic’s audio characteristics do not change when your MFJ-434B is installed. Dual controls make it easy to tailor audio level to match your voice.
All audio lines are RF filtered to eliminate RFI, audio feedback and distortion. An audio isolation transformer totally eliminates hum and distortion caused by ground loops.
It’s easy to use — just plug in your 8 pin microphone cable and plug the MFJ-434B shielded cable into your transceiver’s mic connector. Internal jumpers let you customize it to Kenwood, Icom, Yaesu, Alinco or Radio Shack rigs. Use your station or built-in microphone for recording.
Built-in speaker-amplifier lets you monitor stored messages. 3.5 mm speaker/headphone jack. SMT technology.
Use 9 Volt battery, 9-15 VDC or 110 VAC with optional MFJ-1312D.
LDG AT600ProII Antenna Tuner NEW $309 – For Sale $225
The LDG AT-600ProII is a general purpose automatic tuner intended for use with midsize amplifiers with up to 600 watts output on SSB or CW.
Like all LDG tuners the AT-600ProII operates automatically, beginning a tuning cycle whenever the SWR exceeds a preset limit. To protect its circuitry it will not tune at power levels above 150 watts; you simply bypass your amplifier (or place it in Standby) to complete a tuning cycle using only the exciter. The AT-600ProII also features LDG’s advanced memory tuning, providing 2,000 memory locations; when tuning near a previously used frequency it will recall the settings for nearly instant tuning. It learns your favorite frequencies and bands as you use it. You can also start a tuning cycle manually whenever necessary.
The AT-600ProII has a large, easy to read bar-graph wattmeter that show forward and reverse power with two selectable ranges (60 and 600 watts), as well as an SWR meter. The optional M-600 4.5″ analog meter shows forward power (60 and 600 watt scales), reverse power, or SWR in peak or average mode. The AT-600ProII will interface with many popular transceivers so you can start a tuning cycle with the radio’s TUNE button. Dedicated control buttons on the tuner allow you to fine-tune capacitance and inductance on those rare occasions when the AT-600ProII can’t find a perfect match by itself.
The AT-600ProII features two output connectors so you can easily switch between two antennas. There are 2,000 memory locations for each antenna, allowing nearly instant returning on frequencies you’ve used before.
The AT-600ProII will tune from 1.8 to 54.0 MHz continuously, and will match Yagis, dipoles, inverted-Vs, slopers, or virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 – 150 ohms on 6 meters). Tuning time is usually under 10 seconds; memory tuning time is under 0.2 seconds. Longwires or antennas fed with ladder line require an external balun, not included.
Yeasu FT100D All Band, All Mode New $900 – For Sale $450
The Yaesu FT-100D built on this success of the widely acclaimed FT-100, adding the convenience of factory installed modules for the ham on the go. The FT-100D is a miniature mobile transceiver that provides coverage of the 160 to 6 meter bands plus the 144 MHz and 430 MHz bands! The ultra-compact FT-100D has an easy-to-read LCD display. This radio combines a unique, user-friendly front panel with high-tech features like DSP to provide performance well above many base stations. And look at the receive coverage: 0.1-76, 108-174 and 420-512 MHz. Refinements include: IF shift, IF NB, dual VFO’s, keyer, 300 memories and CTCSS. Plus you get DSP bandpass filter, notch filter, noise reduction and equalizer. There are dual SO-239 antenna pigtails on the rear panel. LDG Auto Tuner INCLUDED!
Improvements over the original FT-100 version include:
* TCXO-8 for incredible 1 PPM stability. Great during digital mode work.
* XF-117C 500 Hz 8-Pole Crystal filter for superb CW selectivity.
* FTS-27 CTCSS Decoder Unit for quiet FM monitoring.
* New larger, high quality speaker for outstanding audio.
Includes MH36B6JS DTMF hand mic. Only 6.3 x 2.1 x 8.1 inches.
Contact: Andy Allen – K2ADA
212-729-0446 or andy@K2ADA.net